ART stands behind every machine we sell!
When you buy fibre laser from ART CNC you are getting the full support of 3 decades of experience in cnc technology. We stake our reputation on it.
ART CNC has a team of dedicated technicians that provide an end-user experience that has been lacking in the industry until now.
ART is an expert in automation and can assist with your every laser requirement, from light sheet to plate steel cutting.
The C3015V & C4020V models are generally paired with a 3kW laser source for cutting up to 10mm thickness, or can be upgraded to 6kW for cutting up to 20mm thickness.
Our technically capable staff are more than salespersons… they are dedicated professionals that really know the cutting industry and work with you to achieve your desired outcome.
Technical Data
| Technical Data | ||
| Cutting Size | mm | C3015V – 3048mm x 1525mm
C4020V – 4064mmx 2032mm |
| Max Acceleration | G | 0.8 |
| Max Speed | m/min | 100 |
| Positioning Accuracy | mm/m | ±0.05mm/m |
| Repeat Positioning Accuracy | mm | ±0.03 |
| Loading Weight | kg | C3015V 600kg (3kw), 800kg（6kw）
C4020V 1200kg (3kw), 1500kg (6kw) |
| Voltage | V | 415V |
| Frequency | Hz | 50 HZ |
| Dimension | mm | About 4800×3600×2800mm |
| Power Requirement Data | KW/A | 21kw/42A（3000W）
31kw/62A（6000W) |
| Operation Requirement | |
| Electricity
Voltage: 415V Frequency: 50Hz Voltage stability: ±5% Voltage regulation: <2% |
Assist gas Supply Cutting
Purified dry compressed air and high purity,Discharge Oil Content :≤0.01ppm.Solid≤0.01um .Dew point：-20℃ ~ -40℃ Oxygen (O2) and nitrogen (N2) purity not less than 99.9% Air ,Oxygen and nitrogen pressure not less than 16 bar
|
| Sheet metal
Homogeneous Smooth Clean |
Compressed Air Supply Device
Pressure: 8 bar Volume: 0.6m ³ Discharge Oil Content :≤0.01ppm.Solid≤0.01um . Dew point：-20℃ ~ -40℃ |
Configuration
|
|
Laser Source – Raycus or IPG
The most well-known brands of laser resonator in the market. High output power, high quality laser beam, over 40% coefficient of efficiency. Compact design, solid and easy to install. high electrical efficiency and environmental friendly. |
 |
Laser Head – Klinge
Focusing Accuracy up to 0.01mm With close-loop motor installed inside the laser head, the focus speed is much faster than market level to achieve higher piercing speed in high thickness materials. Full Protection Inside & Outside Equipped with double bottom protective lens inside, extending the lifetime of main lens. Equipped with stainless steel cover outside, protect the lines from laser flares. |
 |
Speed Reducer & Gears
Backlash of less than 4 arc min. Smooth operation, high transmission accuracy and good feed force. The reduction gear and wheel gear are welded to effectively guarantee the accuracy of the machine tool. |
|
|
Bus Control System
Bus control through EtherCAT protocol, fast control speed with fiber laser cutting optical and transmission system. Cut-off line, Multiple stage piercing, laser energy precise control, maintenance reminder, process report etc. |
 |
Machine Body – Semi Hollow Welding Structure
Extra-high Strength Steel Tensile strength over 500 MPa Strong Rear Frame Added taper pin lock, 0 shaking during cutting and loading process. Strong blade worktable, bigger holding capacity. Professional Manufacture Process Each machine body will pass at least 6 steps including welding process,stress annealing , rough machining etc. for release the welding stress. |
 |
Crossbeam – Aluminum Beam
Light-weight, and with good dynamic performance, with better flexibility and ductility. Without heavy weighted iron beam, no need to operate beam with large inertial motor power. Less electricity is consumed during running. |
Cutting Capacity
| Material | Thickness (mm) | 3 kW (m/min) | 6 kW (m/min) |
|---|---|---|---|
| Carbon Steel (O2) | 1 | 7.0–12.0 | 47 |
| 2 | 5.0–6.5 | 36 | |
| 3 | 4.0–4.1 | 4.5 | |
| 4 | 3.5–3.8 | 3.8 | |
| 5 | 2.8–3.2 | — | |
| 6 | 2.7–3.0 | 3.0 | |
| 8 | 2.1–2.2 | 2.4 | |
| 10 | 1.3–1.5 | 2.1 | |
| 12 | 1.0–1.3 | 1.8 | |
| 16 | 0.7–0.8 | 0.8 | |
| 20 | 0.6–0.7 | 0.7 | |
| 22 | — | 0.6 | |
| 25 | — | 0.5 | |
| Stainless Steel (N2) | 1 | 60 | 46 |
| 2 | 15.0–18.0 | 36 | |
| 3 | 9.0–12.0 | 18 | |
| 4 | 6.2–6.5 | 14 | |
| 5 | 3.6–4.2 | 9 | |
| 6 | 3.0–3.3 | 8 | |
| 8 | 1.3–1.5 | 4.1 | |
| 10 | — | 1.9 | |
| 12 | — | 1.1 | |
| 14 | — | 0.8 | |
| 16 | — | — | |
| 20 | — | — | |
| Aluminum (N2) | 1 | 60 | 50 |
| 2 | 12.0–20.0 | 28 | |
| 3 | 9.0–12.0 | 24 | |
| 4 | 6.2–6.5 | 16 | |
| 5 | 3.6–4.2 | 7 | |
| 6 | 3.0–3.3 | 5 | |
| 8 | 1.3–1.5 | 2.8 | |
| 10 | — | 1.8 | |
| Brass (N2) | 1 | 37.0–40.0 | 55 |
| 2 | 12.0–14.0 | 32 | |
| 3 | 6.0–6.8 | 18 | |
| 4 | 3.8–4.2 | 9 | |
| 5 | 2.4–2.8 | — | |
| 6 | — | 5 | |
| 8 | 0.8–1.0 | 2 | |
| Copper (O2) | 1 | 30.0–35.0 | 24 |
| 2 | 8.0–10.0 | 14 | |
| 3 | 4.3–5.0 | 10 | |
| 4 | 2.5–3.0 | 7 | |
| 5 | — | 4.5 | |
| 6 | 0.8–1.0 | 3 |